Product - Porcelain Lamp Holder

INDUSTRIAL TYPE BAYONET AND SCREW CAP
These Lamp Holders and Ceiling Roses are manufactured from special quality high grade non-porous, non -hygroscopic distortion-free, glazed porcelain with high electrical and mechnical properties by wet process.
	BLH-2 : Bayonet Cap Type B-22 double contact two pin Porcelain Lamp Holder rated for 240 Volts & 200 Watts with back plate fixing hole centers 44.5 mm apart, suitable for GLS (25W 200W ) and MLL ( 160 W ), lamps.
	BLH-3 : Bayonet Cap Type 22-D-3 double contact three pin Porcelain Lamp Holder rated for 240 Volts & 125 Watts with back plate fixing hole centers 44.5 mm apart, suitable for HPMV (80W 125W ), lamps.
	BLH-27 : Edison Screw Cap Porcelain Lamp Holder Type E-27 rated for 240 Volts & 200 Watts with back plate fixing hole centers 54 mm apart. As a special facility oblong mounting hole centers 44.5 mm apart as a replacement of 2 pin & 3 pin lamp Holders. A special design feature is centrally spring-loaded brass contact in place of brass bress bent patti to ensure positive contact at all times, suitable for HPMV (125 W ), HPSV (70 W), MLL (160 W), GLS (200 W) lamps.
	BLH-40 G : Goliath Edison Screw Cap Porcelain Lamp Holder Type E-40 rated for 240 Volts, 250 Watts to 1500 Watts with back plate fixing hole centers 30 mm apart, suitable for HPSV (150W-400 W), HPMV (250W-1000W), GLS ( 300 W- 1500W) Lamps.
	BLH-40 GS : Skirted Goliath Edison Screw Cap Porcelain Lamp Holder Type E-40 rated for 240 Volts, 250 Volts250 Watts to 1500 Watts with back plate fixing hole centers 30 mm apart, suitable for HPSV (150 W-400W ), HPMV ( 250 W-1000W), GLS (300W-1500 W ) lamps.
	Conforms to IS 1258-1987 & IS 10276-1982.

PORCELAIN CEILING ROSE
	BCR-5 : Surface Mounting Porcelain Ceiling Rose with two terminals rated for 240 Volts & Suitable For Mounting on 51mm (2") center standard junction box.
	Conforms to IS 371-1979.